top of page
Wet Blasting Equipment

V-Series - Portable Blast Pots
Wet Blasting Systems & Dry Abrasive Blasters

APOLLO® V1

Wet Blasting Equipment

The Apollo-V1 blasting system is an 80Litre (dry) dual induction abrasive blasting system (blast pot) - utilizing all the same blasting system design features as our V2 machine but for dry blasting only.
This machine is ideally suited to blast room installations where continous production is desired to eliminate downtime.
The Apollo-V1 machine comes C/W with 10M  multi-core blast hose & Cobra®blast nozzle with 10mm nozzle.

An upgraded design in comparison with a welded pressure vessel type blast pot, permitting 24/7 production in you blast room installation, or open blast cleaning operations.

Air compressor requirements: 70-180cfm - (depending on nozzle size)
COBRA® NOZZLE - AIR CONSUMPTION CHART

Nozzle sizes available: 6, 8 or 10mm


 

APOLLO® V2

Wet Blasting System for Sandblasting

The Apollo-V2 blasting system is an 80Litre selectable wet/dry, dual induction, abrasive blasting system. The V2 machine is ideal for surface coating/blasting contractors where portability & wet/dry blasting is both required.

The Apollo-V2 machine comes C/W with 10M multi-core blast hose & Cobra®blast nozzle with 10mm nozzle.

Air compressor requirements: 70-180cfm - (depending on nozzle size)
COBRA® NOZZLE - AIR CONSUMPTION CHART

Nozzle sizes available: 6, 8 or 10mm

Cobra®blast nozzle sizes are easily interchangeable without changing the entire nozzle assembly.

bottom of page